![](/uploads/1/2/6/2/126257783/392576765.jpg)
So here’s a really annoying problem: you connect a USB drive or USB SD card reader to your PC and Windows tells you it needs to format the drive in order to use it properly! The only issue is that you didn’t have this problem two days ago and everything connected just fine! So what’s the solution?
The application runs in the system tray and displays any detected weight With dedicated software you can perform a variety of tasks fnk tech usb card reader playing and As there are many drivers having the same name, we suggest you to try the Driver Tool, otherwise you fnk tech usb card reader try one by on the list of available driver below. Realtek USB Card Reader 10.0.4 is available to all software users as a free download for Windows 10 PCs but also without a hitch on Windows 7 and Windows 8. Compatibility with this software may vary, but will generally run fine under Microsoft Windows 10, Windows 8, Windows 8.1, Windows 7, Windows Vista and Windows XP on either a 32.
Well, Windows is quirky and if some of the system files get corrupted, you can end up with this really annoying problem of having to reformat all your USB drives and SD cards!
Most of the time that’s not even an option and if you can plug the device into another system where it loads properly, then why format.
Luckily, there are a couple of things you can do to get rid of the problem. In this article, I’ll try and walk you through the different actions you can take to correct this issue.
Method 1 – System File Checker
The first thing to try is to run the System File Checker, a built in tool that scans all the Windows system files and replaces any corrupted ones with fresh copies. You need to run this using an elevated command prompt.
You can get to an elevated command prompt by going to Start, then Accessories and right-clicking on Command Prompt and choosing Run as Administrator. In new versions of Windows, just search command prompt from the Start Menu and then right-click on the first result.
Now type sfc/scannow and press Enter. Get ready to sit back and wait a while because this process usually takes a long time.
If, for whatever reason, system file checker cannot replace all corrupt files (which it will tell you), then you will have to manually do it. You can follow the instructions here:
Hopefully, you won’t have to do that though. Now go ahead and restart your computer and then try to plug in your USB device and see what happens. If you are still being asked to format it, keep reading.
Method 2 – Reinstall USB Controller
Another thing you can try is to reinstall the USB controllers on your Windows machine. You can do this by clicking on the Start button and then typing in devmgmt.msc in the search box and pressing Enter.
If you are not using Windows 7, you can go to Device Manager by going to the Control Panel, then System and clicking on Hardware.
Go ahead and right-click on each item under Universal Serial Bus controllers and choose Uninstall. After you have uninstalled all items, go ahead and restart your computer and it will automatically reinstall each USB port.
Method 3 – Run chkdsk
So it may not seem worth doing, but running a chkdsk on your USB drive might also fix the problem. chkdsk will check for bad sectors and fix them if they exist. Now you might be saying that the USB drive works perfectly fine on a different computer, so it can’t have any possible problem, right? Well, maybe not.
Either way, it’s a solution that some people have said has fixed the problem. Again, you need to run it using an elevated command prompt, which I mentioned how to do above. Then type in the following command without the brackets:
The [drive] is the drive you want to scan. /p will check the hard drive even if it has been marked as dirty. /r will find the bad sectors and recover any data from there. Once it has finished, go ahead and disconnect the drive and then restart your computer. See what happens when you connect it again.
Method 4 – Plug into Different USB Port
At this point, you are running out of options. One solution a few people mentioned was trying to plug the device into a different USB port. Apparently this is more of a problem with Windows XP.
Somehow when a device gets connected to a particular port, Windows remembers something about that device and connecting it to a different port can confuse Windows.
I’ve never really had this problem before, but it seems to cause issues with some folks. It’s worth a shot and could be a simple fix.
Method 5 – Try Partition Recovery Tool
If the USB drive is giving you the same message on any computer you connect it to, then it’s probably an issue with the file system structure on the USB drive.
You can try to repair the USB drive by running chkdsk, which I mentioned in Method 4. If that doesn’t work, you can try out a third-party tool called TestDisk, which is open source and free.
It’s a command line tool and therefore a little more technical, but it does work very well. They also have good documentation. In our case, you should follow the step-by-step instructions for recovering and repairing partitions.
Method 6 – Format the Device
![Windows Windows](http://cdn2.goughlui.com/wp-content/uploads/2016/10/fnk-pidvid.png)
If you still get this message, then there really is not much else you can do other than format it. However, you should connect the device to another computer, copy off all the data and then perform a format.
Also, when you format the device, you should go to Disk Management and then right-click on the device there and choose Format.
You can get to Disk Management by right-clicking on My Computer or the Computer icon in Windows 7 and clicking on Manage. Also, check out my previous post on the best file format to use when formatting USB drives.
Lastly, I wrote a post if your computer doesn’t recognize your USB drive at all and how to fix that issue. If you had this problem and fixed it some other way, post a comment here and let us know how! Enjoy!
New Action Plus Voip. PDF Cruzer micro 2. Sim Card Data Recovery Tool. If none of these helps, you can contact us for further assistance. Recover Deleted Message Download. If you cannot find the cable that came with your camera you can get one at a store like Radio Shack or many office supply stores, possibly Game Stop, etc.
Uploader: | JoJonos |
Date Added: | 26 December 2015 |
File Size: | 51.22 Mb |
Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
Downloads: | 95763 |
Price: | Free* [*Free Regsitration Required] |
Compatibility Testing I decided to test it amongst my test platforms to see whether there were any USB compatibility issues. In decal mode, similar to the PC Suite Utility.
Memory Card file recovery software is an easy to use application designed to recover lost or deleted files and folders including saved photographs, music files, text documents and other similar files and Some computers that came with Windows XP and built before might come with separate software for the memory card reader. Try a different memory card of the same fnk tech usb card reader ueb the same slot. Take the camera with you and get a cord with the proper connection to fit your camera on one end and a USB cord on the other.
Nimbas Phone Soft Ware.
I’ve got usbb USB card reader to read e. Resolving other issues with memory card readers. Hi, Thank you for posting your query in the Microsoft Community. When fnk tech usb card reader, most devices appear in Windows as a Removable Disk and can be used in the same way as the card reader. Click the plus sign next to Disk Drives to open the category.
Freeware String Instrument Sounds. All download links are direct full download from publisher sites or their selected mirrors.
Select Optimize for quick fnk tech usb card readerand then click the OK button. ESD can damage components inside the computer. The edges of metal panels can cut skin. The card reader might experience a minor drop in device performance. Did this solve your problem? USB Barcode reader driver. Cardd Total Commander Dll. There is a window on the top panel for the activity LED. Be attentive to download software for your operating system.
Sandisk Compact flash cards not recognised. Tried absolutely everything!? | Yahoo Answers
To be sure you are using the latest driver and firmware, periodically check for new releases of this software on the HP Software Download Web page in English. Get your software, a start up supply of Card s and Card Reader. The application runs in the system tray and displays any detected weight With dedicated software you can perform a variety of tasks fnk tech usb card reader playing and As there are many drivers having the same name, we suggest you to try the Driver Tool, otherwise you fnk tech usb card reader try one by on the list of available driver below.
Turn off the computer and disconnect the power cord.
Sandisk Compact flash cards not recognised. Tried absolutely everything!?
Be careful not to slide skin along any edge of the computer’s interior metal. Fnk tech usb card reader Card information backup manager restore lost phone book, address book directory, retrieve read and One type of connection on the reader your computer might be different.
Need a Home Security Safe?
You should uninstall original driver before install the downloaded one. As Seen on TV.
New Drivers
![](/uploads/1/2/6/2/126257783/392576765.jpg)